DGS-3627EOL EOS

מתג מנוהל 24 פורטים Layer3 במהירות 10/100/1000, בנוסף 4 פורטים Combo 1000Base-T/Mini GBIC SFP ו-3 סלוטים להרחבות

תאור

 The latest generation of D-Link xStack switches support IPv6 routing and have more advanced features than ever to address today’s concerns regarding security, QoS, and management. The xStack DGS-3627 is a 24-Port gigabit managed switch with 4 combo SFP slots or 100BASE-FX fiber ports with 3 optional 10Gigabit uplinks. The D-Link DGS-3627 is equipped with robust features that fulfill the most demanding network for voice and video streaming. The DGS-3627 is stackable up to 12 units with 40Gbps full-duplex of stacking bandwidth fixed-in. To help secure your network, the D-Link Safeguard Engine helps prevent Denial-of-Service (DoS) attacks while the Access Control List (ACL) enhances security of your network. The DGS-3627 is equipped with industry standard management features including an easy-to-use web-based administrator interface and a standard CLI interface. D-Link provides these features on a scalable platform that increases your company’s productivity while protecting your investment.

Learn more. Download the D-Link End Point Security Strategy Whitepaper

IPv6 and IPv4 Routing
The xStack DGS-3627 provides current IPv4 networks with a simple migration path to IPv6 and protects your investment for future network upgrades when greater security and larger addressing are required. Basic static routing such as RIP and RIP2 are supported for small network routing applications. Advanced routing protocols such as OSPF and equal cost routing are supported for load balancing and building a scalable network.

Stackable Up to 12 Units
The xStack DGS-3627 has two optional ports to install stacking modules that provide up to 40Gbps in data stacking backplane, full-duplex. This enhances your overall network performance for those switches transmitting large files such as graphics or pictures. Under stacking mode, the switches are hot-swappable. This means that in a stack configuration, any of the switches can be replaced or removed without affecting the network. There is no need to reconfigure a replacement switch; just give the new switch the same stack number ID as the old switch and the network will carry the same configuration as before. This minimizes the downtime of a network and maximizes the productivity of your business. Also, to facilitate network administration, cross stack port mirroring and port trunking are supported.

The D-Link Safeguard Engine and Security
The DGS-3627 incorporates advanced mechanisms to detect an attack against the central processing unit of the switch and to take corrective action on the attacking interface. When a DoS attack is waged against the DGS-3627, the D-Link Safeguard Engine detects the threat and prevents overload of the central processor thus ensuring network integrity and helping to maintain open network bandwidth channels.

In addition, the D-Link xStack DGS-3627 offers a variety of authentication methods, including those without the requirement of a RADIUS server. It supports MAC based Access Control (MAC), which authenticates the user based on the MAC address of the client so that authentication is transparent to the client. It also supports Web-based Access Control (WAC), which prompts for username and password before allowing access to TCP traffic. Lastly, the xStack DGS-3627 supports Network Access Protection (NAP). This feature works in conjunction with Microsoft® software platforms such as Vista® to reinforce health and security policies of the network, including policy validation, network restriction, remediation, and ongoing compliance.

Voice and Video Applications
For today’s business, having voice, data, and video on the same network is common practice. This challenge is met by the D-Link xStack DGS-3627, which supports 802.1p with 8 queues. The administrator can designate the priority of the traffic based on a variety of means including IP and MAC address, so that voice data is clear and jitter-free. Video traffic can also be assigned with the same priority. In addition, the D-Link xStack DGS-3627 provides IGMP Snooping, which allows the forwarding of multicast packets such as streaming audio and video without increasing network broadcast congestion. By snooping IGMP registration information within a frame, a list of workstations that have joined the multicast group is created. This list then allows the switch to intelligently forward packets to only the appropriate member workstations. For IPv6 traffic, the DGS-3627 supports MLD snooping. Multicast routing is supported under independent multicast protocol, including PIM-SM and PIM-DM. DVMRP is also supported to interconnect two multicast-enabled networks across non-multicast networks. In conjunction with support for 802.1Q VLANs, Quality of Service (QoS) and security can be achieved on a network infused with data traffic.

Ease of Management
The DGS-3627 supports SNMP v1/2/3 so traps can be set on abnormal events and information can be polled to maximize the productivity of the network. Other standard management features also supported include RMON and IEEE 802.1d Spanning Tree. User interfaces include an intuitive web-based GUI or standard CLI, with administration traffic protected through SSL or SSH encryptions

מאפיינים כללים

 

Interface

10/100/1000BASE-T Ports

24

Combo SFP Slots

4

Open Slot for 10-Gigabit Uplink Modules

3

RS-232 Console Port

1

Physical Stacking

Optional Module for Stacking

Single-Port DEM-410CX or DEM-410X

Maximum Number of Stacking Ports Optional

2 CX4 or XFP Ports

Stacking Speed (Per Port)

20Gbps (Full-Duplex)

No. of Units Per Stack

12

Optional 10-Gigabit Uplink (Transceivers sold separately)

Single XFP Slot Module (DEM-410X)

Yes

Single CX4 Port Module (DEM-410CX)

Yes

10GBASE-SR (300 m Multi-Mode Fiber) Support

Yes

10GBASE-LR (10 km Single-Mode Fiber) Support

Yes

Maximum Number of 10-Gigabit Uplinks Installable

3

Performance

Switch Fabric

108Gbps

Packet Forwarding Rate

80.36Mpps

Packet Buffer

2MB

MAC Address Table

16K Entries

IP v4 Routing Table

12K Entries

IP v6 Routing Table

6K Entries

IP v4 Host Table

8K Entries

IP v6 Host Table

4K Entries

Jumbo Frame Size

9,216 Bytes

Power

Power Supply

100 to 120VAC, 200 to 240VAC, 50/60Hz, Internal Power Supply

Power Consumption (Maximum)

72.3 Watts

Optional Redundant Power Supply

DPS-500

Physical/Environmental

Heat Dissipation

246.70 BTU/Hr

Ventilation DC Fans

Four 1.6in x 1.6in x 0.8in (40mm x 40mm x 20 mm) fans

One 2.0in x 2.0in x 0.4in (50mm x 50mm x 10 mm) fans

Dimensions (W x D x H)

17.4in x 15.3in x 1.7in (441mm x 389mm x 44mm)

Size

19-Inch Rack-Mount Width, 1U Height

Weight (Without Optional Module)

12.1 lbs (5.51 kg)

Temperature

Operating: 32°F to 104°F (0ºC to 40ºC)

Storage: 14°F to 158°F (-10ºC to 70ºC)

Humidity

Operating: 10% to 90% non-condensing

Storage: 5% to 90% non-condensing

EMI

FCC Class A, CE, C-Tick,VCCI

Safety

cUL, CB

Software Functions

L2 Features

 

IGMP snooping v1, v2

1K IGMP Snooping Groups

64 Static Multicast Address

 

Spanning Tree

802.1D STP

802.1w RSTP

802.1s MSTP

STP Loopback Detection

BPDU Filtering per Port and per Device

Trunking Across Stack

 

MLD Snooping

1K MLD Snooping Groups

64 Static Multicast Addresses

 

802.3ad Link Aggregation

Up to 32 Groups per Device

Up to 8 Gigabit Ports or 2 10-Gigabit Ports per Group

 

Port Mirroring

One-to-One Mode

Many-to-One Mode

ACL Mode

VLAN

802.1Q

Total 4K VLAN Groups

Maximum 255 Dynamic VLAN Groups

GVRP

802.1v

Maximum 4K Static VLAN Groups

Configurable VLAN ID from 1 to 4094

Double VLAN

L3 Features

 

L3 Routing

Up to 12K entries (all route entries combined)

Up to 256 IPv4 static route entries

Up to 128 IPv6 static route entries

Up to 12K IPv4 dynamic route entries

Up to 6K IPv6 dynamic route entries

 

Floating Static Route

IPv4 Floating Static Route

IPv6 Floating Static Route

Policy Based Route

RIPng (IPv6)*

Multiple IP Interfaces per VLAN (Up to 5)

Multi Path Routing Supporting Equal Cost (EC) and Weighted Cost (WC)

VRRP

IPv6 Ready Phase 1

IGMP v1, v2, v3

DVMRP v3

Per Port Limit IP Multicast Address Range for Control Packet

 

L3 Forwarding

Up to 8K IPv4 Forwarding Entries

Up to 4K IPv6 Forwarding Entries

Up to 8K Entries (all L3 Hardware Forwarding Entries Combined)

 

OSPF v2

OSPF Passive Interface

OSPF NSSA (Not So Stubby Area)

OSPF Equal Cost Route

RIP v1, v2

Up to 64 IP Interfaces

 

Multicast

Up to 64 Static Multicast Groups

Up to 1K Dynamic Multicast Groups

Up to 1K Multicast Groups (Static and Dynamic D-Link Safeguard Engine Multicast Groups Combined)

Multicast Duplication (Up to 32 VLAN per Port)

PIM DM for IPv4

PIM SM for IPv4

IPv6 Tunneling

QoS (Quality of Service)

Per Port Bandwidth Control (Granularity of 64Kbits per Second)

Per Flow Bandwidth Control (Granularity of 64Kbits per Second)

802.1p Priority Queues (8 Queues)

Queue Handling Mode Support: WRR and Strict Modes

 

CoS Based On:

Switch Port

802.1p Priority Queues

IPv4/v6 Address

Protocol Type

IPv6 Flow Label

User-Defined Packet Content

VLAN ID

MAC Address

DSCP

IPv6 Traffic Class

TCP/UDP Port

ACL (Access Control List)

Up to 8 Profiles

Up to 1792 Global Rules, Each Rule Can Set Its Own Port Range

 

ACL Based On:

Switch Port

802.1p Priority Queues

IPv4/v6 Address

Protocol Type

IPv6 Flow Label

User-Defined Packet Content

Time (Time-Based ACL)

VLAN ID

MAC Address

DSCP

IPv6 Traffic Class

TCP/UDP Port

Security

RADIUS Authentication for Management Access (RFC 2138, 2139)

SSH v2

SSL v3

Web-based Access Control

MAC-based Access Control

Traffic Segmentation

D-Link Safeguard Engine

Support Microsoft® NAP

TACACS+ Authentication for Management Access (RFC 1492)

Port Security (Up to 16 MAC Addresses per Port)

802.1x Port-based/MAC-based Access Control

Guest VLAN

Broadcast/Multicast Storm Control (Minimum Granularity of 1 Packet per Second)

IP-MAC-Port Binding (Up to 500 Entries per Device) Supporting ARP and ACL Modes

Management

Single IP Management v1.6

CLI

Telnet Server

Telnet Client*

SNMP v1, v2c, v3

SNMP Trap on MAC Notification

BootP/DHCP Client

System Log

Trap/Alarm/Log Severity Control

Flash File System

CPU Monitoring via Web, CLI, SNMP

Virtual Interface*

Web-based GUI

Web GUI Traffic Monitoring

Web MAC Address Browsing

TFTP Client

RMON v1, v2

sFlow

DHCP Auto-Configuration

DHCP Relay Option 82

DHCP Server

Dual Image

Dual Configuration

MIBs

MIB-II (RFC 1213)

SNMP v2 MIB (RFC 1907)

RMON v2 MIB (RFC 2021)

802.3 MAU MIB (RFC 2668)

IF MIB (RFC2233, 2863)

IGMP v3 MIB

OSPF v2 MIB (RFC 1850)

VRRP MIB (RFC 2787)

PIM MIB for IPv4 (RFC 2934)

Ping MIB*

L2 Specific MIB

Private MIB

Bridge MIB (RFC 1493)

RMON MIB (RFC 1757, 2819)

Ether-like MIB (RFC 1643, 2358, 2665)

802.1p MIB (RFC 2674)

RADIUS Authentication Client MIB (RFC 2618)

RIP v2 MIB (RFC 1724)

IP Forwarding Table MIB (CIDR) (RFC 2096)

IPv4 Multicast Routing MIB (RFC 2932)

RADIUS Accounting Client MIB (RFC 2620)

Trace Out MIB*

L3 Specific MIB

Warranty Information

Warranty

lifetime warranty

Ordering Information

Part Number

Description

DGS-3627

xStack Managed 24-Port Gigabit Stackable L3 Switch, 4 Combo SFP Slots, 2 Slots for Optional 10Gig Uplinks

DGS-3650

xStack Managed 48-Port Gigabit Stackable L3 Switch, 4 Combo SFP Slots, 2 Slots for Optional 10Gig Uplinks

DEM-211

100BASE-FX 155Mbps MMF Fiber LC SFP Transceiver

DEM-310GT

1000BASE-LX SFP LC Transceiver, Up to 10Km

DEM-311GT

1000BASE-SX SFP LC Transceiver, Up to 500m

DEM-410CX

1-Port 10GBase-CX4 Module

DEM-410X

1-Port 10Gigabit XFP Module (XFP Transceiver Sold Separately)

DEM-421XT

10Gigabit XFP MMF Transceiver

DEM-422XT

10Gigabit XFP SMF Transceiver

DPS-500

Redundant Power Supply

DPS-800

Redundant Power Supply Rack (Holds Two Units of DPS-500)

תקנים

הורדות

איורים

DGS-3627/A
מראה מקדימה
מראה מאחורה

דף מידע

ראה גם